2017 Spring Sew Along – A Rolled Sewing Case – Week 4

Welcome to the 2017 Spring Sew Along – A Rolled Sewing Case!

Be sure to read the previous 4 posts for this Sew Along.

——–

This week we are finishing our Rolled Sewing Case by making and attaching the ends, and adding the pages as well as ties.

img_20170310_200643.jpgFor the end caps, you need the tin circles, exterior and interior fabric. You may also want batting for pin cushion ends, and pasteboard or cardstock if that is your preferred method from Fanciful Utility.

Cover each tin end with your favorite technique from Fanciful Utility. You are simply using tin instead of pasteboard as your base.

I chose to use wool batting on the outside of my ends for pin cushions. I also used cotton batting for the inside in the covering process. *I do not suggest this latter part with the cotton batting because it did not create an ideal tight & smooth surface.*

Use a couple pins to run through the edge of one end in alongside the tin. Using a whip stitch, secure the end to the tube. I suggest whipping in one direction and back to the beginning. Do a wiggle test to check the security.

 

If you chose to include needle pages, assemble your needle pages and decorate as desired. Whip stitch them into place in your sewing case. (or use a running stitch through just the lining.)

Cut a length of ribbon that will wrap around your rolled sewing case and tie. Fold the ribbon 12″ from one end. Secure this fold to the closing end of the sewing case.

Congratulations, you have completed your Rolled Sewing Case!

Please, join us for future Sew Alongs.

Published in: on May 1, 2017 at 12:00 pm  Leave a Comment  

2017 Spring Sew Along – A Rolled Sewing Case – Week 2

Welcome to the 20117 Spring Sew Along – A Rolled Sewing Case!

Be sure to read the first two posts  for Materials and Week 1.

——–

This week we are going to be working on our interior materials.

I chose to make a sewing case with a single pocket. You may have a scissors pocket or other pockets as well. Be sure to consult your edition of Fanciful Utility for guidance on these.

For my pocket, I cut my silk to 5″ wide by 3″ deep.¬† I hemmed the top and made a box pleat in the bottom for a roomy pocket. img_20170310_180404.jpgI laid the pocket right side down on the lining where I wanted it to be. (My plaid helped make that easy.) Using a running stitch, I attached the pocket. Then folded it up into place. I basted the pocket along the edges.

I have come to like the batting or lining used in some originals because it seems to give the sewing case more support when made of silk. I lined my interior fabric up on top of my batting and basted into place.

20170310_211612.jpg

Next week, we will bind the interior to the exterior and add the tin tube.

 

Published in: on April 17, 2017 at 12:00 pm  Leave a Comment  

Announcing the 2017 Spring Sew Along – A Rolled Sewing Case

At long last, the 2017 Spring Sew Along is here!
Join us in making a Rolled Sewing Case with an Exclusive Tin Tube made by the craftsman at the Genesee Country Village and Museum.

This rolled sewing case, also called a housewife or huswife, unrolls to reveal a hollow base which can hold spools of thread. The hollow section of this sewing case is large enough to hold period correct spools of thread. When I tested mine, I found it held three small wooden spools, two large wooden spools or one Coats and Clark with one Guttenburg spool.

Using techniques from Fanciful Utility, you choose whether to add a pocket, scissors pocket, needle-pages or other period correct storage spaces to your sewing case.

The base of this sewing case is a hand crafted tin tube and ends made by the tinsmiths at the Genesee Country Village and Museum. The tin tubes are available exclusively through the Genesee Country Village and Museum’s Crafts in the Village program for a donation of $5 each, plus $7.15 Priority shipping. Send requests and donation with shipping to: ATTN Deanna Berkemeier; Genesee Country Village and Museum; 1410 Flint Hill Road; Mumford, NY 14511. Please make check or money orders out to Genesee Country Village with Crafts in the Village in the memo line. Locals can email dberkemeier at GCV dot org to arrange pickup at. 

Please order by March 31st so we can all begin our Sew Along together in April. 

Comment below or message Anna that you will be participating. You may also wish to join the Fanciful Utility Sew Along group on Facebook.

 
img_20170310_162242.jpgRecommended materials (dimensions given with leeway for cutting.)

  • Your copy of Fanciful Utility
  • Tin Tube Kit from GCVM
  • Exterior material: Leather, oil cloth, painted canvas, wool, tapestry  – 6″ by 12″
  • Interior fabric: Silk taffeta, quilt weight cotton or tropical wool (also for end caps) – 6″by 14″
  • Interior pockets: Silk, leather, cotton as desired
  • Hand full of wool batting
  • 2 yards of 5/8″ cotton sateen ribbon img_20170310_163346.jpg
  • Thin cotton or wool batting. Felted wool will also work. – 6″by 12″
  • Wool flannel or felted wool for needle pages

 

Published in: on March 14, 2017 at 3:49 pm  Comments (19)  

Protected: Genesee Valley Historic Sew Along – Password Required – Making a Pin Ball

This content is password protected. To view it please enter your password below:

Published in: on November 20, 2015 at 6:00 am  Enter your password to view comments.  
Tags: